Attendance autosave, and protecting it on a weak connection
Goal
Understand how the system saves your attendance marking automatically with no save button, and protects you from losing changes when the page is closed by accident or the internet drops during a session.
When do you need this?
- You are marking students on a pitch, in a hall or in an outdoor yard where coverage is weak or intermittent.
- You want to be sure what you marked really reached the system before closing the screen.
- You have seen the Save failed — retry state and want to know the right next step.
Before you start
- This works automatically; there is no setting to turn on. It applies in the same way to the session attendance screen and to the day check-in screen.
- You need permission to take attendance (the same permission that allows marking).
Where it lives
Sidebar > the Today's work group > Attendance (the attendance hub) > choose the activity and press Mark. Autosave begins as soon as you mark the first student. For the full steps see Taking session attendance.
1. How does autosave work?
The screen is designed to spare you pressing a save button after every name, while at the same time protecting you from forgetting a final save and losing your data. Saving happens in the background as follows:
- An immediate save with no button: as soon as you press Present or Absent for a student, the system starts saving that change automatically — no manual save button is needed.
- Batching consecutive marks: a network request is not sent on every press; the system waits a short interval (around 700 milliseconds) after your last change, so if you mark several students quickly in a row it gathers them into a single batch, easing the load on the network and keeping the response fast.
- Sending only what changed: the whole class roster is not resent; the system sends only the rows of students whose state changed, which reduces the data used — useful on a weak connection.
The save status indicator
A small indicator at the top of the screen tells you the state of saving moment by moment, passing through three states:
| State | What it means |
|---|---|
| Saving… | Your changes are being sent to the system now. |
| All saved | Everything you marked has arrived safely and nothing is pending. |
| Save failed — retry | The send failed (usually because of the connection) — the text itself is a button that retries, and a fixed red bar appears with it at the bottom of the screen (section 3). |
All saved is the continuous autosave indicator. The green Attendance saved message appears when you press Finish, as a final confirmation once the roster is complete.
2. Leaving the screen before saving has finished
Inside the system: it waits for the save, then leaves
If you leave the attendance screen by any route inside the system — the Back button, a link in the menu, the tab bar at the bottom of the screen in Field Mode, or the phone's Back button — while some marking has not arrived yet:
- It waits instead of leaving at once: the system sends what is left immediately and keeps you on the page, and a bar reading Saving attendance before leaving… appears at the bottom of the screen. As soon as the save completes, it finishes leaving by itself with no press from you. (In Field Mode the Session tab is checked first and then the Arrivals tab, and the system brings forward whichever tab is waiting for its save or asking you, so neither tab's entries are lost.)
- If the save fails, you stay on the page: the red bar and the Retry button appear (section 3), and you do not leave while your marking is unsaved.
- If you try to leave again after the failure, the Leave attendance window asks you: "Some attendance changes were not saved. Leave without saving them?" — press Cancel to stay and retry, or Leave without saving to leave and drop those changes unsaved.
- If the wait is long and you try to leave a second time while the send is still going, the window asks: "Attendance is still being saved. If you leave now, the latest changes may not be saved. Leave anyway?". Press Cancel so the system keeps waiting and takes you out automatically the moment the save completes — the safest choice — or Leave without waiting to leave now. If the save completes while the window is open, it closes by itself and you leave. If the save fails while the window is open, its question changes to "Some attendance changes were not saved. Leave without saving them?" and the reason for the failure appears inside it; press Cancel to stay on the page, and you will find the Retry button ready (from the keyboard, the selection lands on it directly).
The same protection works on Day check-in at the door, in its own words: Saving arrivals before leaving…, and a Leave day check-in window asking "Some arrivals were not saved. Leave without saving them?".
If the Trainer notes drawer is open with something you typed and have not saved, the system asks about it too before you leave (Unsaved note), and choosing Close without saving agrees to drop it if the exit goes through - it is only discarded once the exit completes. If the exit stops at a later step (in Field Mode, for example, because an Arrivals entry was not saved), the drawer and the note come back exactly as you wrote it.
Closing the tab or the browser
To protect your work from being lost when a tab is closed by accident:
- Continuous watching: the system watches for any attempt to close the tab or navigate away while you have marking that has not yet reached the system or is still being sent (the Saving… state).
- The browser's warning: the browser shows a warning that there are changes that may not be saved, and asks you to confirm.
(The wording of that message comes from the browser itself and in its own language — in an English browser, for example:
Changes you made may not be saved.) - When the warning stops: it appears only while marking is pending; as soon as saving completes and All saved appears, you can leave safely.
3. Dealing with a weak or dropped connection
If you are marking students in an outdoor yard and coverage drops:
- The save state changes: the save indicator at the top turns to the red Save failed — retry state.
- The alert bar at the bottom of the screen: a fixed red bar appears at the bottom of the screen reading "Your latest attendance changes were not saved. Check your connection and retry, and keep this page open until they are saved.". It stays visible wherever you scroll in the roster until the save succeeds, so you will not miss it halfway down the list.
- Retrying: once the connection returns, press Retry in the bar at the bottom of the screen, or the Save failed — retry status text at the top, and every accumulated change is sent to the system in one go. (Marking a new student is also enough for the system to retry sending automatically.)
For the attendance state codes and their effect on the statistics, see Reference: attendance states.
Frequently asked questions
What do I do if I see the "Save failed — retry" state? When the connection returns, press Retry in the red bar at the bottom of the screen (or the status text at the top) to resend everything you marked in one go. You can carry on marking the rest of the students meanwhile, because the changes stay on the page until the send succeeds — so do not close it before then. See Taking session attendance.
Do I have to press a save button after every student? No, there is no manual save button; your marking is saved automatically moments after your last press. For final confirmation press Finish, and the Attendance saved message appears. Details in Taking session attendance.
The internet dropped while I was marking — will the names I recorded be lost? No, as long as the page stays open: the system keeps what you marked and carries on working despite the drop, and the red bar appears at the bottom of the screen. As soon as the connection returns, press Retry to send every accumulated change.
I pressed Back and did not leave the page — why? Because you have marking that is still being sent; the system waits for the save to complete and shows Saving attendance before leaving…, then takes you out automatically. If the save fails, you stay on the page so you can press Retry. Details in section 2 above.
Why did the browser warn me that I was leaving the page? Because you have marking that has not yet reached the system, and the warning protects you from losing it. Wait for All saved to appear, then leave the page safely.
How do I change a student's attendance after it has been saved? Open the session from Editing past attendance and change the state; the edit is saved automatically in the same way.