Skip to main content

The waiting list

Goal​

Manage the families on the waiting lists of activities that have reached capacity: see whose turn is next, admit whoever deserves a free seat, transfer them to another activity, or open a new copy of the activity and move those waiting into it in one go.

Admitting is a staff decision, not an automatic action

When a seat frees up, the system promotes nobody automatically. If the seat frees up through a cancellation or a withdrawal, the school team receives an alert about it; if it frees up because the activity's capacity was raised, no alert is sent at all. In both cases a member of staff opens the waiting list and admits the next family in the queue themselves. This is deliberate: the decision — and the conversation with the family — stays with the school.


When do you need this screen?​

  • The activity is full and more families still want in, so you put their requests on a waiting list rather than rejecting them.
  • An accepted student withdrew, or the capacity was raised, and you want to admit the first person waiting to take the free seat.
  • You want a single view of everyone waiting at the school — across every activity — to see where demand is building up.
  • The waiting list has grown to the point where it is worth opening a second section or copy of the activity to absorb the extra demand.
  • A parent has tired of waiting and you want to move their child to another activity that has a free seat.

Before you start​

Depending on what you are going to do, you need these permissions (your school manager grants them from access management):

  • View the school waiting list, to open the school-wide Waiting list screen from the sidebar.
  • View the waiting list, to open a particular activity's waiting list.
  • Add to the waiting list, to add a student to it or admit one from it.
  • Transfer a waiting-list entry to another activity, to move someone waiting to another activity that has a free seat.
  • Copy an activity, to open a new copy of the activity and move those waiting into it.

Make sure the right school is selected in the school switcher first.


Two ways into the waiting list​

The list has two entry points, both working and both showing the same meaning of "waiting"; only the scope differs:

Entry pointWhat it showsWhen to use it
Waiting list in the sidebarEveryone waiting across the whole school, in every activityTo see the size of demand and whose turn is next, without picking an activity first
The Waiting list button in an activity's headerOnly the people waiting for one activityWhen you already have the activity open and want to act on it (admit, transfer, new copy)

The first way: school-wide​

From the sidebar: the Today's work group > Waiting list — after choosing the school in the school switcher. This entry point does not need an activity chosen in the top bar.

The second way: from inside the activity​

  1. From the sidebar: the Today's work group > Registrations.
  2. From the activity filter choose the activity you want, and the activity header appears above the table.
  3. Press the Waiting list button among the activity's actions.

See Reviewing and triaging registrations for the detail of reaching an activity and its header.


The school-wide Waiting list screen​

What does it show?​

The screen gathers every registration tagged as waiting that is still live at the selected school: those genuinely waiting for a seat. Registrations whose path has ended (cancelled, rejected, transferred, completed, and so on) are not shown, because those people are no longer in the queue.

That same definition is what the badge next to Waiting list in the sidebar counts, and the Waiting list card on the Operations page — all three read the same number as long as you are on the same school, on the default scope, and with no filters, and all of them respect the scope of your assignment: someone assigned to particular activities sees only their own. The waiting-list figure in the executive overview uses the same definition too, except that it always sums the whole school.

The order: oldest first​

The list is shown by default in order of seniority: whoever was added first appears first, because that is the order of the queue you go by when admitting. You can change the ordering to look through it, but admit in order of seniority unless you have a written reason not to.

The default scope: current activities​

Above the table is a scope switcher with three options: Current activities, Ended activities and All activities. The screen opens on Current activities — those that have not finished — because waiting for a finished activity is meaningless in practice, and a note beneath the switcher points out that only that scope is shown. So if you cannot find a name you expected, the most likely reason is that its activity has ended; switch the scope to see it.

Search and filtering​

  • Search for the family or the student directly, from the search field above the table.
  • Narrow the list to a single activity when you want to focus on one program.
  • Results are paged, with the total number waiting in front of you, so you can see the size of demand at a glance.

Admitting a family from this screen​

Admitting from this screen is the same action described in Accepting a student from the waiting list below: the Accept into activity button on the row, which appears only to those with the Add to the waiting list permission — and that permission alone governs admitting, not the manage-registration one.

That is why Cashier and SupportReadOnly see the complete list without the accept button, and it is deliberate: viewing is not admitting. But it does not mean the row carries no action at all — anyone with manage registration sees a Manage button beside it, opening the registration record to view and work on, and Cashier does hold that permission, while SupportReadOnly sees no button on the row at all.


A look at the single-activity screen​

The waiting-list table shows, for each student: a Check box, a sequence number (No.), For Parent (yes/no — whether the registration is for the guardian themselves), Child, Child Id, Parent, Phone, Email, Status, and the date Added.

The Added column shows when each student was put on the list, so you can judge their place in the queue (oldest first). An Another Activity column and an Accept button also appear on each row, each according to your permissions.


How does a student reach the waiting list?​

Adding a student to the list is done from the registrations screen, not from either waiting-list screen:

  1. From the registrations table, open the ⋯ More actions menu on the student's row.
  2. Choose Add to waiting list.
  3. The registration is tagged with a waiting-list badge next to its status, and the student appears on the activity's screen immediately. They also appear on the school-wide screen as long as the activity is current; if the activity has already ended you will only find them after switching the scope to Ended activities or All activities — because the school-wide screen opens on Current activities. Their absence for that reason does not mean the addition failed, so do not repeat it.

Accepting a student from the waiting list​

When a seat frees up through a cancellation or a withdrawal — a parent cancelled their registration, the school cancelled it, it was cancelled for non-payment, or a parent declined a renewal invitation or let it expire — the school team receives an alert that a seat has freed up on that activity, and then a member of staff takes the action by hand:

  1. Open the waiting list — from the sidebar or from the activity's header — and read the queue by seniority.
  2. Select the student whose turn it is in the table.
  3. Press the accept button on their row: Accept into activity on the school-wide screen, or Accept on the single-activity screen. On the school-wide screen a confirmation naming the student and the activity appears before it runs. The button does not appear at all for anyone without the Add to the waiting list permission.
  4. The student is lifted off the waiting list and returns to the registrations roster keeping their current status, then continues along their normal path (approve → pay → …).
  5. Contact the family yourself to tell them the seat is available and what they need to do — the platform does not notify a parent that a seat has freed up.

Accepting from the registration panel​

You can also accept without opening the waiting list. When you open a waitlisted registration with Manage in the Registrations table, a Waitlist tag sits next to its status, and the payment section has a line saying it holds no seat in the activity. The panel shows no Approve, Confirm payment or Record payment; in their place is Accept into activity - the same acceptance as on the waiting list, needing the same permission:

  1. Press Accept into activity; a line explains what will happen.
  2. Press Confirm.
  3. If the activity still has a free seat, the tag disappears and the next step for the registration's status appears: Approve for a request pending review, or Confirm payment for one awaiting payment. If the activity is full, the panel stays open and tells you its seats are taken.

Nothing is sent to the family at this step, so contact them yourself as in step 5 above. Open full page shows the same line without an accept button, so accept from the panel or from the waiting list.

Raising capacity opens seats with no alert at all

The free-seat alert comes from cancellations and withdrawals alone. If you raise an activity's capacity from Setting fees and capacity — the fix that Troubleshooting suggests when an activity is full — the seats open immediately without an alert reaching anyone.

So make it two steps rather than one: after every capacity increase, open the waiting list yourself and admit whoever is due. Do not wait for a notification that will not arrive.

The status does not change on acceptance

Accepting only removes the waiting-list tag; it does not change the registration's status. So a student who was Pending review stays that way until you approve them. For the detail of the status path, see The registration lifecycle.

Accept first, then approve and collect

While a registration carries the waiting-list tag it does not hold a seat in the activity, so the system offers no action that collects money on it, and refuses one that reaches it: Approve, Confirm payment, Switch to online and Record payment. Bulk actions are no exception: a bulk Approve or Confirm payment skips every waitlisted row before it runs, and its confirmation line gives how many will be skipped and why (on the waiting list). And when you import payments from a file, a waitlisted registration's row is skipped and no payment is recorded for it.

The right order: accept the student from the waiting list first (acceptance checks that a seat is free), then approve and complete payment as usual. That way no family pays for a seat that was never counted for them.

For the same reason the system refuses Add to waiting list on an Awaiting payment registration whose family still holds an online payment link that can be paid. To free that seat, cancel the registration for non-payment - the link is closed with it.


Transferring a student to another activity​

If a parent would rather move to a different activity:

  1. In the Another Activity column, press the Transfer button next to the student's name.
  2. The Transfer To Another Activity dialog opens; choose the alternative activity from the list of open activities (the current activity and any sub-groups are excluded).
  3. Press Confirm (or Cancel to back out).

The student leaves the current activity's waiting list and takes a seat on the alternative activity (they are no longer waiting); if the alternative activity is full, the system refuses the transfer. The registration takes the alternative activity's fee, with the sibling discount when it applies, and keeps its previous price if it is Paid, if any amount has been collected on it, or if it has an online payment that has not finished. To move an accepted student between activities, see Transferring a student between activities.


Opening a new copy of the activity and moving those waiting​

When the waiting list grows to the point where the best answer is to open a second section or copy of the activity:

  1. Tick the Check box next to each student you want to move to the new copy.
  2. Press the main Create activity copy and move registrations button at the top of the screen.
  3. The system creates a copy of the current activity and moves the selected students into it, with a message confirming the copy was created.

If you press the button without selecting anyone, the system warns you to choose at least one. After creating it, set the new copy's capacity and fees from Setting fees and capacity.


What you should end up with​

  • After accepting: the student disappears from the waiting list and appears on the registrations roster with their previous status, ready to continue their path.
  • After a transfer: the student is removed from the current activity's waiting list and takes a seat on the alternative activity, priced by the rule above.
  • After creating a copy: a new activity exists carrying the selected students, and their names clear from the original activity's waiting list.

Frequently asked questions​

Where do I find the waiting list? By two routes: Waiting list in the sidebar under the Today's work group, showing everyone waiting across the school; or from Registrations by choosing the activity in the activity filter and then pressing Waiting list among the activity's actions. Neither route appears to anyone without permission to view it.

Why can I not find a name I know is waiting, on the school-wide screen? Because the screen opens on Current activities only, and because it shows genuinely waiting people alone — someone whose registration was cancelled, rejected or transferred is no longer in the queue. Check that their activity has not ended, and that their registration still stands.

Does the system promote someone waiting automatically when a seat frees up? No. There is no automatic acceptance in any circumstance, and no notification reaches the parent that a seat has freed up. If the seat frees up through a cancellation or a withdrawal, the school team gets an alert, and then a member of staff accepts the next family themselves and contacts them.

I raised the activity's capacity — will I get an alert that there are free seats? No. The alert is for cancellations and withdrawals alone, and raising capacity opens the seats silently. Make it a fixed habit: after every capacity increase, open the waiting list and admit whoever is due, yourself.

The numbers on the badge, the operations card, the executive overview and this screen differ? All of them are computed from the same definition of someone "waiting for a seat" at the selected school, so they match in the default state. If you see a different number, the reason is one of three, and all three are in your hands:

  • An active filter on the screen: text in the search field, or the list narrowed to a single activity. Clear the filters and the total returns.
  • A non-default scope: the switcher on Ended activities or All activities rather than Current activities, showing names the badge does not count.
  • A different school: the school chosen in the school switcher is not the one you meant.

One case stays outside your hands: if your assignment at the school is to particular activities rather than the whole school, the badge and this screen show your activities alone, while the executive overview figure sums the whole school — so it appears larger. That is intended, not an error.

How do I add a student to the waiting list in the first place? From the Registrations table, open the ⋯ More actions menu on the student's row and choose Add to waiting list; they then appear on this screen.

I accepted a student from the list — why did their status not become "Awaiting payment" straight away? Because the Accept button lifts the waiting tag only and does not change the status; the student returns with their previous status and then continues their normal path. See The registration lifecycle.

What is the difference between transferring to another activity and creating a copy of the activity? Transfer moves one student into a seat on an activity that already exists, while Create activity copy and move registrations creates a new activity and moves everyone you selected into it at once.

How do I open a second section for the students waiting, quickly? Tick the Check box next to the students, then press Create activity copy and move registrations; a new activity is created with them in it, and you set its capacity from Setting fees and capacity.