Skip to main content

Adding an admin with specific permissions, and managing admins

Goal​

Create Admin accounts with specific permissions according to their role, and manage them from one page: add a new admin and choose their role, assign an existing admin to your school, grant admin access to an existing account (a parent, for example), reset their password, or edit or delete them.

Important

An admin is not a school admin. The admin you add here works only within the roles you choose for them (registrations, attendance or finance, for example). A School Admin gets full access to the branch and is managed from a separate screen — see Managing school admins. To decide what each role can do, see Roles and permissions.


Which role do you choose?

For each role's card and what it can actually do, see the role catalogue, and for the "grant a role or edit a role" decision see the SystemAdmin playbook. For the right way to end a member of staff's access, see the staff access lifecycle.


When do you need this screen?​

  • When adding a new member of staff and giving them limited permissions through one or more roles rather than full access.
  • When bringing in an admin who already works at another school, without creating a new account for them (this is for a SystemAdmin alone).
  • When granting admin access to an existing non-administrative account (a parent, say) while keeping their current sign-in.
  • When editing an admin's details, resetting their password, or stopping their access by deleting them.

Before you start​

  • Permissions required: view admins to reach the list, create or assign an admin to add one, edit an admin to edit, and delete an admin to delete. The Schools & roles button appears to SystemAdmin alone, as does Reset password. The Assign existing button appears to anyone who holds create or assign an admin, but its search works for a SystemAdmin only; if you need an admin from another school assigned to yours, ask the support team through Help or request. A SystemAdmin holds all of them. If a particular button does not appear for you, your account does not have its permission — see Roles and permissions.
  • The roles must be set up in the system beforehand so you can assign them; saving an admin requires at least one role.

Where it lives​

Sidebar > People > Admins (after choosing the school) — the All Admins list opens, with Add Admin and Assign existing buttons.


Steps​

1. Adding a new admin with a specific role​

  1. On the Admins page, press Add Admin.
  2. Fill in the form:
    • First Name: required.
    • Last Name: optional.
    • City: choose from the Select City dropdown (optional).
    • Email: a valid address, required, and it is their sign-in name for the admin portal.
    • Phone number (5XXXXXXXX): optional.
      Important

      The Saudi mobile rule: enter the number without the country code (+966) and without the leading zero, beginning with 5 and 9 to 10 digits long.

    • Roles: open the Choose role dropdown and pick the role you want. Each chosen role appears as a chip, you can add more than one, and you can remove a chip by pressing its ×. At least one role is required.
  3. Press Save (it stays disabled until the required fields are complete and at least one role is chosen).
Caution

If you choose the School Admin role, the phrase — full access appears next to it with a warning that the School Admin role grants full access to this school and should be assigned only to a trusted school owner. Choose it only deliberately.

2. Assigning an existing admin to your school​

If the person is already an admin (at your school or another), add them rather than creating a new account. These steps are for a SystemAdmin, because the search in Assign existing works for nobody else; if you are a school admin, ask the support team for the assignment through Help or request.

  1. On the Admins page, press Assign existing — the Assign existing admin page opens.
  2. In Search admins, type the name, mobile or email (at least 2 characters). A column shows which schools each admin works at.
  3. Press Select next to the admin you want (a disabled Already here button appears if they are already assigned to your school).
  4. On the roles step, open Choose role and set the roles under Roles for this school.
  5. Press Assign to this school, or Back to search to go back.

3. Granting admin access to an existing account (promoting a parent)​

When adding an admin with an email belonging to a non-administrative account (a parent, for example):

  1. Enter the details as usual in the Add Admin form, choose the roles, and press Save.
  2. The system finds that the email already has an account, and shows a This email already has an account screen explaining that it is an existing non-administrative account.
  3. Review the chosen roles, then press Grant admin access to continue, or Cancel to back out.
  4. The person keeps their current sign-in, and a one-time administrative password is created for them for the admin portal.

4. Resetting an admin's password​

  1. In the All Admins list, press Reset password on the admin's row (shown to SystemAdmin only).
  2. Confirm the operation; a new one-time password is created and shown in the Password reset panel.
  3. Copy the password and hand it to the admin; it will not be shown again, and they will be asked to change it at their first sign-in.

5. Editing or deleting an admin​

  1. To edit: press Edit on the admin's row to open the Edit Admin screen, change the fields and save.
  2. To delete: press Delete, then confirm in the Delete Admin dialog. Deleting stops access; it does not erase the data permanently, and what it does depends on the admin's schools: if your school is the last school they are assigned to, their whole admin account is disabled and their session ends; otherwise they are removed from your school only and their other schools stay as they are. Either way, the delete does not touch the same person's parent or trainer account, if they have one. Bringing them back is usually not done from this screen, because the Add Admin form refuses their email after the delete; if you deleted them by mistake, ask the support team to bring them back through Help or request.
  3. To manage their roles across schools: press Schools & roles — the detail is in Assigning admin roles per school.

What you should end up with​

  • After creating a new account, an Admin created panel appears with the one-time temporary password.
  • After granting admin access to an existing account, an Admin access granted panel appears with the administrative password.
  • After adding back an admin account that was disabled when it was removed from its last school (by Delete or Unassign from school) — usually done by a SystemAdmin, because the form refuses that email for a school admin in most cases — no password is shown on screen. Instead a card titled Admin re-added appears, with a Done button that takes you back to the list. The card says that adding them again restored their access and signed them out of every open session, then says what happened to their password, which is one of three things:
    • A one-time password was emailed to them: the old password no longer works, and the new one was sent to their email address; ask them to sign in with it and then change it. Do not press Reset password afterwards, because that invalidates the password that was just emailed to them.
    • It could not be sent: the old password no longer works, and the new one could not be emailed to them, so they cannot sign in yet. If you are a SystemAdmin, use Reset password on their row (step 4); otherwise, ask the support team through Help or request to reset the password.
    • The old password was kept: the password they had before they were removed still works. It was left unchanged on purpose, because this sign-in is not used only for admin access at this school. If they do not know it, or there is a reason it should stop working, use Reset password on their row if you are a SystemAdmin (step 4); otherwise, ask the support team through Help or request to reset it.
  • The admin appears immediately in the All Admins list with their roles; if they have more than one, the first role's chip is shown with an expandable "+" indicator for the rest.
  • Role permissions take effect at the admin's next sign-in, not in their currently open session.

Common states and errors​

  • The Save button is disabled: complete the required fields (first name and email) and choose at least one role.
  • The email is already registered: if it belongs to an existing administrative account, do not create a second account for them: a SystemAdmin assigns it through Assign existing, and if you are a school admin, ask the support team for that through Help or request. If it belongs to a non-administrative account, the grant-admin-access screen appears.
  • The message "This e-mail belongs to an account outside this school, so it cannot be added here…": the account has no active link to your school, and it can also appear for an admin you deleted from your school. Use a different address, or ask the support team to add them through Help or request.
  • The add or delete buttons do not appear: your account does not have the right permission; ask a SystemAdmin for it.
  • The Reset password button does not appear: that is expected. Only a SystemAdmin — the Skool.Cool support team — can reset an admin's password, and it is not granted to a school admin or any other admin through any role or permission. If an admin needs a new password, ask the support team through Help or request, and a new one-time password is created for them to sign in with and then change (step 4).

Frequently asked questions​

What is the difference between an admin and a school admin?​

An admin works only within the roles you choose for them (specific permissions), while a School Admin gets full access to the branch. School admins are managed from a separate screen — see Managing school admins.

Can I add someone who already works as an admin at another school?​

Yes, without creating a new account — but through a SystemAdmin: the search in Assign existing works for them alone. They search for the person, choose their roles at your school and press Assign to this school. If you are a school admin, ask the support team for it through Help or request.

I want to give a parent admin access — how?​

Add them from Add Admin with the same email and choose the roles. The system will find that the email belongs to an existing account and show the Grant admin access screen; the person keeps their current sign-in and a one-time administrative password is created for them.

How does an admin receive their password?​

When the account is created, access is granted, or the password is reset, a one-time temporary password appears that must be copied immediately, because it is not shown again, and they are asked to change it at their first sign-in. Adding back an admin account that was disabled when it was removed from its last school shows no password on screen: an Admin re-added card says what happened to their password instead — the detail is under What you should end up with above. See Signing in and verification.

I changed an admin's roles and they saw no difference — why?​

Because changes do not apply to their currently open session; they need to sign out and back in. To manage their roles at each school separately, see Assigning admin roles per school.

Where do I find the admins list?​

From the sidebar open People and then Admins, after choosing the school.